OK

 

 

 

 

 

Pi Supply Raspberry Pi and Pi PoE HAT Case, black31.12.1899 23:00:00124-93725637316366Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/chassis/124-9372Pi Supply Raspberry Pi and Pi PoE HAT Case, black <BODY><P>Pi Supply Pi PoE Switch HAT Case, case for Raspberry Pi and Pi PoE Switch HAT, black</P> <P>From Pi Supply comes this box to enclose and protect your PoE switch HAT and a Raspberry Pi. This Raspberry Pi case has a robust and stylish design and is made of black polycarbonate. The box has cutouts for all ports and contacts.</P> <P>• Fits Pi Model B+, Pi 2 Model B, Pi 3 Model B and Pi 3 Model B+<BR>• Robust and stylish black polycarbonate design<BR>• Cutouts for accessing ports and contacts<BR>• Cutouts allow status lights to be visible through the box<BR>• Mounting rails on both sides of the case for wall mounting<BR>• Supplied with four rubber feet for added stability</P> <P>Product size: 90x45x85xmm</P></BODY>False0616909468188
Raspberry Pi PoE HAT, official, for Pi 3 Model B+, onboard fan31.12.1899 23:00:00RPI-POEHAT5637324688Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/tilbehør/RPI-POEHATRaspberry Pi PoE HAT, official, for Pi 3 Model B+, onboard fan <BODY><P>Raspberry Pi official PoE HAT, for Raspberry Pi 3 Model B+, onboard fan</P> <P>The Raspberry Pi PoE HAT is used to power a Raspberry Pi 3 Model B+ via an Ethernet cable. Just make sure you are using PoE compatible equipment and cables.</P> <P>• 802.3af PoE<BR>• Fan control<BR>• 5V/2.5A DC output<BR>• 37–57V DC, Class 2 device<BR>• Fully isolated switched-mode power supply<BR>• 25mm x 25mm brushless fan for processor cooling<BR></P></BODY>False
Raspberry Pi 3 Model B+, single-board computer, Bluetooth, Wi-fi, PoE31.12.1899 23:00:00RPI-3MODBPLUS5637325412Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-3MODBPLUSRaspberry Pi 3 Model B+, single-board computer, Bluetooth, Wi-fi, PoE <BODY><P>Raspberry Pi 3 Model B+, 1.4 GHz single-board computer, dual band wi-fi, Bluetooth 4.2, PoE capable</P> <P>The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz<BR>and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.<BR>The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced<BR>wireless LAN compliance testing, improving both cost and time to market.</P> <P>The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B but there is a slight difference on the parts soldered on. This means, among other things, that you can use the same power supply as the Pi 3 but some cases does not fit well.</P> <P>Specifications<BR>• Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4GHz<BR>• 1GB LPDDR2 SDRAM<BR>• 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN<BR>• Bluetooth 4.2, BLE<BR>• Faster Ethernet (maximum throughput 300Mbps)<BR>• 4 × USB 2.0 ports<BR>• Extended 40-pin GPIO header<BR>• 1 × full size HDMI<BR>• MIPI DSI display port<BR>• MIPI CSI camera port<BR>• 4 pole stereo output and composite video port<BR>• Micro SD format for loading operating system and data storage<BR>• 5V/2.5A DC via micro USB connector<BR>• 5V DC via GPIO header<BR>• Power over Ethernet (PoE)–enabled (requires separate PoE HAT)<BR>• Operating temperature, 0–50 °C<BR>• H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.0 graphics</P> <P>Product size (WxDxH): 85x17x56mm<BR>Product weight: around 60g</P></BODY>False5060214370165
Adafruit Pi T-Cobbler Plus Kit Breakout 2x20 Pi A+, B+, Pi 2/3, Zero05.09.2018 08:55:4719895637260946Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/raspberry-pi-i-o-kort/1989Adafruit Pi T-Cobbler Plus Kit Breakout 2x20 Pi A+, B+, Pi 2/3, Zero <BODY><P>Adafruit Pi T-Cobbler Plus, Breakout kit for Raspberry Pi</P> <P>The Adafruit T-Cobbler Plus is an add-on prototyping board designed for the Raspberry Pi. It can break out all those huge power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This set makes "cobbling together" prototypes with the Pi effective and easy.</P></BODY>False
Raspberry Pi PiNoir kamera modul, 8MP, 1080P31.12.1899 23:00:00RPI-PINOIR25637209092Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-PINOIR2Raspberry Pi PiNoir kamera modul, 8MP, 1080P <BODY><P>Raspberry PiNoir V2 Camera Module, No IR filter, 1080p, 8MP, Sony IMX219PQ CMOS, 15 pin ribbon cable</P> <P>The Raspberry Pi HD Pi NoIR Camera Board connects to any Raspberry Pi or Compute Module, allowing you to create HD video and still photographs. The Pi NoIR (No Infrared) is the same as the standard camera module but without an IR filter. Therefore it is great for photography and video in the dark.</P> <P>The module utilises the IMX219PQ image sensor from Sony which offers high-speed video imaging and high sensitivity. The Pi NoIR module offers reduced image contamination such as fixed pattern noise & smearing. It also features automatic control functions such as exposure control, white balance & luminance detection.</P> <P>A 15 cm ribbon cable attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, you can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs. Alternatively there are libraries such as Picamera Python, and many others that you can find online.</P></BODY>False5056070923874
Raspberry Pi kamera modul, 8MP, 1080P31.12.1899 23:00:00RPI-CAMV25637209091Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-CAMV2Raspberry Pi kamera modul, 8MP, 1080P <BODY><P>Raspberry Pi Camera Module V2 Video Module, 1080p, 8 MP, Sony IMX219PQ CMOS, 15-pin ribbon cable</P> <P>The Raspberry Pi High Definition (HD) Camera Board connects to any Raspberry Pi or Compute Module, allowing you to create HD video and still photographs.<BR>It utilises the IMX219PQ image sensor from Sony which offers high-speed video imaging and high sensitivity.<BR>The Raspberry Pi Camera Module offers reduced image contamination such as fixed pattern noise & smearing. It also features automatic control functions such as exposure control, white balance & luminance detection.</P> <P>A 15 cm ribbon cable attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, you can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs. Alternatively there are libraries such as Picamera Python, and many others that you can find online.</P></BODY>False5056070923867
Micro USB-kabel med på/av switch for Raspberry Pi, bulk, 1,5m, svart31.12.1899 23:00:00RPI-10375637207654Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/tilbehør/RPI-1037Micro USB-kabel med på/av switch for Raspberry Pi, bulk, 1,5m, svart <BODY><P>USB-kabel med på/av bryter for Raspberry Pi, bulk, 1,5m, USB Typ Micro B ha, USB Typ A ha, svart </P> <P>Denne kabelen med på/av-bryter er perfekt for å få en strømbryter til din Raspberry Pi. Den kan brukes sammen med en USB-lader og den er gjort med 22AWG leadartjocklek så den er i stand til å håndtere 2A strøm. <BR><BR>• 22AWG<BR>• Håndterer 2A</P></BODY>False
Raspberry Pi Official Case Black/Grey31.12.1899 23:00:00RPI-BOX175637197914Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/chassis/RPI-BOX17Raspberry Pi Official Case Black/Grey <BODY><P>Official Raspberry Pi 3 Model B/B+, Pi 2 Model B/B+ chassi (bulk), two part, black/grey</P> <P>The Official Raspberry Pi 3 Model B/B+ case. Easy snap-fit assembly, it has plastic LED light protector and cut-outs for all connectors.</P></BODY>False640522710980
MikroElektronika - MIKROE-512, 10-pk jumper kabler, Ha til Ho, 15cm31.12.1899 23:00:00RPI-10215637190387Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/tilbehør/RPI-1021MikroElektronika - MIKROE-512, 10-pk jumper kabler, Ha til Ho, 15cm <BODY><P>MikroElektronika - MIKROE-512, 10-pk jumper kabler(sett), Ha til Ho, 0.15m, forskjellige farger</P> <P>Disse 0.15m jumperkablene er ideelle for prototyping. Hver pakke inneholder 10stk kabler med en blanding av forskjellige farger.</P></BODY>False0100000010174
Raspberry Pi 7" LCD-touch-skjerm Raspberry Pi, 10-punkt kapasitiv, sva31.12.1899 23:00:00RPI-LCD75637165578Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/bildeskjermer/RPI-LCD7Raspberry Pi 7" LCD-touch-skjerm Raspberry Pi, 10-punkt kapasitiv, sva <BODY><SPAN lang=EN> <P dir=ltr align=left></SPAN><SPAN lang=NO-BOK>7" LCD-touch - skjerm, Raspberry Pi, 10 punkt kapasitiv berøring, 800x480, svart</P> <P dir=ltr align=left>Den etterlengtede 7 "Official Raspberry Pi Berøringsskjerm er endelig her! Kan skilte med en ryddig 800x480 skjerm @ 60fps oppløsning, og 10 poeng kapasitiv berøringsskjerm, denne 7 "skjerm for Raspberry Pi gir brukerne muligheten til å lage alt-i-ett, integrerte prosjekter som enkortsdatamaskiner, infotainment-systemer og integrerte prosjekter</P> <P dir=ltr align=left>Den 800x480 skjerm koblet via en adapter styret som håndterer strøm, og signal konvertering. Bare to tilkoblinger til Pi er nødvendig; strøm fra Pi GPIO-port og en flatkabel som kobles til DSI port til stede på alle Raspberry Pi`s. Berøringsskjerm drivere med støtte for 10-finger touch og et tastatur på skjermen er tilgjengelig på den nyeste Raspbian OS for full funksjonalitet uten fysisk tastatur eller mus.</P> <UL> <P dir=ltr align=left> <LI>Slå på din Raspberry Pi til en berøringsskjerm, infotainment system, eller frittstående enhet. <P></P> <P dir=ltr align=left></P> <LI>Virkelig Interactive - de nyeste programvaredriverne vil støtte et virtuelt "på skjermen" tastatur, så det er ikke nødvendig å koble til et tastatur og mus. <P></P> <P dir=ltr align=left></P> <LI>Lag din egen "Internet og Things" (IOT) enheter, inkludert en visuell visning. Bare koble Raspberry Pi, utvikle et Python-skript for å samhandle med skjermen, og du er klar, lage dine egne hjemme automasjon enheter med berøringsskjerm evne. <P></P> <P dir=ltr align=left></P> <LI>Et utvalg av pedagogisk programvare og programmer tilgjengelig på Raspberry Pi vil være berørings aktivert, noe som gjør læring og programmering enklere på Raspberry Pi. <P></P></LI></UL> <P dir=ltr align=left>Teknisk spesifikasjon</P> <P dir=ltr align=left>• 7" Berøringsskjerm<BR>• Skjerm størrelse: 194mm x 110mm x 20mm (inkludert avstand)<BR>• Synlig skjermstørrelse: 155mm x 86mm<BR>• Skjermoppløsning 800 x 480 pixels<BR>• 10 finger kapasitiv berøring<BR>• Kobles til Raspberry Pi bord med et bånd kabel koblet til DSI port.</P> <P dir=ltr align=left>Mål (BxDxH): 194x20x110mm.</P></SPAN></BODY>False5056070923850

 

 

 

Raspberry Pi Zero, seperate GPIO headers, microSD, green31.12.1899 23:00:00RPI-ZEROH5637350918Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-ZEROHRaspberry Pi Zero, seperate GPIO headers, microSD, green <BODY><P>Raspberry Pi Zero, seperate GPIO headers, microSD, green</P> <P>The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project!</P> <P>• Mini HDMI port<BR>• Micro USB power<BR>• 1GHz Single-Core CPU<BR>• Composite video headers<BR>• MicroSD/SDHC (Up to 32GB)<BR>• HAT-compatible 40-pin header</P> <P>Dimensions(BxDxH): 65 x 30 x 5 mm<BR>Weight: 9 g</P></BODY>False
Raspberry Pi Zero W, seperate GPIO headers, WiFi+BT, microSD, green31.12.1899 23:00:00RPI-ZEROWH5637350917Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-ZEROWHRaspberry Pi Zero W, seperate GPIO headers, WiFi+BT, microSD, green <BODY><P>Raspberry Pi Zero W, seperate GPIO headers, WiFi+BT, microSD, green</P> <P>The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project!</P> <P>• Mini HDMI port<BR>• Micro USB power<BR>• 1GHz Single-Core CPU<BR>• Composite video headers<BR>• MicroSD/SDHC (Up to 32GB)<BR>• HAT-compatible 40-pin header<BR>• Integrated WiFi and Bluetooth connectivity</P> <P>Dimensions(BxDxH): 65 x 30 x 5 mm<BR>Weight: 9 g</P></BODY>False
Raspberry Pi 3 Model B+, single-board computer, Bluetooth, Wi-fi, PoE31.12.1899 23:00:00RPI-3MODBPLUS5637325412Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-3MODBPLUSRaspberry Pi 3 Model B+, single-board computer, Bluetooth, Wi-fi, PoE <BODY><P>Raspberry Pi 3 Model B+, 1.4 GHz single-board computer, dual band wi-fi, Bluetooth 4.2, PoE capable</P> <P>The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz<BR>and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.<BR>The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced<BR>wireless LAN compliance testing, improving both cost and time to market.</P> <P>The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B but there is a slight difference on the parts soldered on. This means, among other things, that you can use the same power supply as the Pi 3 but some cases does not fit well.</P> <P>Specifications<BR>• Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4GHz<BR>• 1GB LPDDR2 SDRAM<BR>• 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN<BR>• Bluetooth 4.2, BLE<BR>• Faster Ethernet (maximum throughput 300Mbps)<BR>• 4 × USB 2.0 ports<BR>• Extended 40-pin GPIO header<BR>• 1 × full size HDMI<BR>• MIPI DSI display port<BR>• MIPI CSI camera port<BR>• 4 pole stereo output and composite video port<BR>• Micro SD format for loading operating system and data storage<BR>• 5V/2.5A DC via micro USB connector<BR>• 5V DC via GPIO header<BR>• Power over Ethernet (PoE)–enabled (requires separate PoE HAT)<BR>• Operating temperature, 0–50 °C<BR>• H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.0 graphics</P> <P>Product size (WxDxH): 85x17x56mm<BR>Product weight: around 60g</P></BODY>False5060214370165
Raspberry Pi 3 Premium Display Kit31.12.1899 23:00:00RPI-10525637305965Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-1052Raspberry Pi 3 Premium Display Kit <BODY><P>Raspberry Pi 3 Premium Display Kit, Raspberry Pi 3 Model B, USB PSU, Touch Screen with case, 8GB micro-SD card with NOOBS, black</P> <P>This kit brings together some of our most popular Raspberry Pi accessories into one kit. It has everything to get the Raspberry Pi working with the Raspberry Pi Touch Screen Display. <BR>The included SD card is pre-installed with NOOBS which provides a simple way to install the various operating systems (OS) that are available for Pi.</P> <P>What is in the Raspberry Pi 3 Premium Display Kit?</P> <P>• Raspberry Pi 3 B Computer Board<BR>• Official Raspberry Pi USB Power Supply<BR>• Official Raspberry Pi Touch Screen LCD <BR>• Official Raspberry Pi Touch Screen Case<BR>• 8 GB micro-SD card with operating system - New Out Of Box Software (NOOBS)</P> <P>Raspberry Pi 3 (Model B)</P> <P>Raspberry Pi 3 has more processing power and now includes wireless connectivity directly on the PCB. With both WiFi and Bluetooth integrated into the Pi 3, it makes connected projects far quicker and easier than ever before.</P> <P>micro-SD card with NOOBS Software</P> <P>The included micro-SD card has NOOBS software pre-installed. If you want to choose an OS for your Pi, then before turning it on, connect it to the Internet via Ethernet otherwise Raspbian is installed. The operating systems available for Raspberry Pi are:</P> <P>• Raspbian<BR>• Pidora<BR>• OpenElec<BR>• RaspBMC<BR>• RISC OS<BR>• Arch<BR>• Linux</P> <P>Note! The Official Pi 3 Power Supply Unit is for the Pi 3 board only. The power supply unit is not a general purpose power supply.</P></BODY>False0700461317708
Raspberry Pi PiNoir kamera modul, 8MP, 1080P31.12.1899 23:00:00RPI-PINOIR25637209092Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-PINOIR2Raspberry Pi PiNoir kamera modul, 8MP, 1080P <BODY><P>Raspberry PiNoir V2 Camera Module, No IR filter, 1080p, 8MP, Sony IMX219PQ CMOS, 15 pin ribbon cable</P> <P>The Raspberry Pi HD Pi NoIR Camera Board connects to any Raspberry Pi or Compute Module, allowing you to create HD video and still photographs. The Pi NoIR (No Infrared) is the same as the standard camera module but without an IR filter. Therefore it is great for photography and video in the dark.</P> <P>The module utilises the IMX219PQ image sensor from Sony which offers high-speed video imaging and high sensitivity. The Pi NoIR module offers reduced image contamination such as fixed pattern noise & smearing. It also features automatic control functions such as exposure control, white balance & luminance detection.</P> <P>A 15 cm ribbon cable attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, you can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs. Alternatively there are libraries such as Picamera Python, and many others that you can find online.</P></BODY>False5056070923874
Raspberry Pi kamera modul, 8MP, 1080P31.12.1899 23:00:00RPI-CAMV25637209091Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-CAMV2Raspberry Pi kamera modul, 8MP, 1080P <BODY><P>Raspberry Pi Camera Module V2 Video Module, 1080p, 8 MP, Sony IMX219PQ CMOS, 15-pin ribbon cable</P> <P>The Raspberry Pi High Definition (HD) Camera Board connects to any Raspberry Pi or Compute Module, allowing you to create HD video and still photographs.<BR>It utilises the IMX219PQ image sensor from Sony which offers high-speed video imaging and high sensitivity.<BR>The Raspberry Pi Camera Module offers reduced image contamination such as fixed pattern noise & smearing. It also features automatic control functions such as exposure control, white balance & luminance detection.</P> <P>A 15 cm ribbon cable attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, you can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs. Alternatively there are libraries such as Picamera Python, and many others that you can find online.</P></BODY>False5056070923867
Raspberry Pi 3 Model B, etkortsdata, Bluetooth, Wi-Fi31.12.1899 23:00:00RPI-10325637197908Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-1032Raspberry Pi 3 Model B, etkortsdata, Bluetooth, Wi-Fi <BODY><P>Raspberry Pi 3 Model B, Etkortsdata, 1GB LPDDR2, Quad Core Arm Cortex-A53 1.2GHz, Dual Core VideoCore IV multimedia-coprocessor, Wi-Fi, Bluetooth</P> <P>Raspberry Pi 3 Model B er en av de raskere medlemmene i Pi-familien. Den leverer 10 ganger så stor prosessorkapasitet som den originale Raspberry Pi og har utvidet tilkobling med 802.11 b / g / n trådløst LAN og Bluetooth 4.1 Low Energy.Det nye kortet er ikke bare bra for å lære seg å programmere, spille etc. Nå passer det perfekt for IoT-prosjekt også. </P> <P>Spesifikasjoner</P> <P>Processor<BR>• Broadcom BCM2387 chipset<BR>• 1.2GHz Quad-Core ARM Cortex-A53 (64Bit)<BR>• 802.11 b/g/n wi-fi og Bluetooth 4.1 (Bluetooth Classic og LE)</P> <P>GPU<BR>• Dual Core VideoCore IV® Multimedia Co-Processor. Tilbyr Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode.<BR>• Kapabel for 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs med teksturfiltrering og DMA-layout. <BR><BR>Minne<BR>• 1GB LPDDR2</P> <P>Operativsystem<BR>• Booter fra MicroSD-kort, kjør en versjon av Linux eller Windows 10 IoT</P> <P>Strømforsyning<BR>• Micro-USB 5V1, 2.5A</P> <P>Tilkoblinger</P> <P>Ethernet<BR>• 10/100 BaseT Ethernet-tilkobling</P> <P>Videoutgang<BR>• HDMI (rev 1.3 & 1.4)<BR>• Komposit RCA (PAL och NTSC)</P> <P>Lydutgang <BR>• 3,5mm-uttak<BR>• HDMI<BR>• 4x USB 2.0-tilkoblinger </P> <P>GPIO-tilkobling<BR>• 40-pins<BR>• Ger 27 GPIO-pins og +3.3 V, +5 V and jord</P> <P>Kameratilkoblinger<BR>• 15-pins MIPI Camera Serial Interface (CSI-2)</P> <P>Displaytilkoblinger<BR>• Display Serial Interface (DSI) 15-vegs plate fleksibel kabeltilkobling med to datastrømmer og en klokkestrøm</P> <P>Minnekortplass<BR>• Push/pull MicroSD</P> <P>Mål (BxDxH): 56x85x17mm</P></BODY>False5060214370172
Raspberry Pi Sense Hat, expansionskort for Raspberry Pi31.12.1899 23:00:00RPI-10225637190388Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-1022Raspberry Pi Sense Hat, expansionskort for Raspberry Pi <BODY><SPAN lang=EN> <P>Raspberry Pi - Sense HAT, expansionskort for Raspberry Pi, for ulike sensorapplikasjoner</P> <P>Sense Hat fra Raspberry Pi er et expansionskort som passer perfekt til montering på toppen av Raspberry Pi for å gi deg flere muligheter for forskjellige sensorfunksjoner. Dette betyr at Sense HAT er perfekt for å finne temperatur og fuktighet, etc. Sense HAT+ og Raspberry Pi = Astro Pi!</P> <P>Hva er på Sense HAT expansionskortet ?<BR><FONT face="Times New Roman">•</FONT> 8x8, 16-bit LED-display som viser data fra sensorer via former, ikoner og meldinger.<BR><FONT face="Times New Roman">•</FONT> Inertial Measurement Unit (IMU) <FONT face="Times New Roman">—</FONT> Et must for hastighet, orientering og tyngdekraftsmåling i rommet. IMU kombinerer et akselerometer, gyroskop og magnetometer i en brikke.<BR><FONT face="Times New Roman">•</FONT> Barometrisk lufttrykksensor<BR><FONT face="Times New Roman">•</FONT> Temperatur-sensor<BR><FONT face="Times New Roman">•</FONT> Fuktighet sensor<BR><FONT face="Times New Roman">•</FONT> 5-knappers joystick som fungerer som tantentbord og mus.</P> <P>Hvordan kommer jeg i gang med Raspberry Pi Sense HAT?<BR>Når Sense HAT er installert på Raspberry Pi, må du installere Astro Pi-programvaren. Deretter kan du starte programmeringen. Raspberry Pi Foundation gir gode eksempler for å starte programmeringen, inkludert å vise farger på en regnbue på LED-skjermen eller rotere LED-skjermen. Få din indre Tim Peake!</P> <P>Se denne lenken for mer informasjon: </SPAN><A href="https://www.raspberrypi.org/learning/astro-pi-guide/"><SPAN lang=EN>https://www.raspberrypi.org/learning/astro-pi-guide/</SPAN></A></P><SPAN lang=EN> <P>OBS: Du må legge avstandsstykker og skruer til for å montere Sense HAT påRaspberry Pi, t.ex. RPI-1010, 18214, 18215.</P></SPAN></BODY>False
MikroElektronika - MIKROE-512, 10-pk jumper kabler, Ha til Ho, 15cm31.12.1899 23:00:00RPI-10215637190387Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/tilbehør/RPI-1021MikroElektronika - MIKROE-512, 10-pk jumper kabler, Ha til Ho, 15cm <BODY><P>MikroElektronika - MIKROE-512, 10-pk jumper kabler(sett), Ha til Ho, 0.15m, forskjellige farger</P> <P>Disse 0.15m jumperkablene er ideelle for prototyping. Hver pakke inneholder 10stk kabler med en blanding av forskjellige farger.</P></BODY>False0100000010174
Raspberry Pi 7" LCD-touch-skjerm Raspberry Pi, 10-punkt kapasitiv, sva31.12.1899 23:00:00RPI-LCD75637165578Falsehttps://www.deltaco.no/produkter/datamaskinkomponenter/hovedkort/raspberry-pi/bildeskjermer/RPI-LCD7Raspberry Pi 7" LCD-touch-skjerm Raspberry Pi, 10-punkt kapasitiv, sva <BODY><SPAN lang=EN> <P dir=ltr align=left></SPAN><SPAN lang=NO-BOK>7" LCD-touch - skjerm, Raspberry Pi, 10 punkt kapasitiv berøring, 800x480, svart</P> <P dir=ltr align=left>Den etterlengtede 7 "Official Raspberry Pi Berøringsskjerm er endelig her! Kan skilte med en ryddig 800x480 skjerm @ 60fps oppløsning, og 10 poeng kapasitiv berøringsskjerm, denne 7 "skjerm for Raspberry Pi gir brukerne muligheten til å lage alt-i-ett, integrerte prosjekter som enkortsdatamaskiner, infotainment-systemer og integrerte prosjekter</P> <P dir=ltr align=left>Den 800x480 skjerm koblet via en adapter styret som håndterer strøm, og signal konvertering. Bare to tilkoblinger til Pi er nødvendig; strøm fra Pi GPIO-port og en flatkabel som kobles til DSI port til stede på alle Raspberry Pi`s. Berøringsskjerm drivere med støtte for 10-finger touch og et tastatur på skjermen er tilgjengelig på den nyeste Raspbian OS for full funksjonalitet uten fysisk tastatur eller mus.</P> <UL> <P dir=ltr align=left> <LI>Slå på din Raspberry Pi til en berøringsskjerm, infotainment system, eller frittstående enhet. <P></P> <P dir=ltr align=left></P> <LI>Virkelig Interactive - de nyeste programvaredriverne vil støtte et virtuelt "på skjermen" tastatur, så det er ikke nødvendig å koble til et tastatur og mus. <P></P> <P dir=ltr align=left></P> <LI>Lag din egen "Internet og Things" (IOT) enheter, inkludert en visuell visning. Bare koble Raspberry Pi, utvikle et Python-skript for å samhandle med skjermen, og du er klar, lage dine egne hjemme automasjon enheter med berøringsskjerm evne. <P></P> <P dir=ltr align=left></P> <LI>Et utvalg av pedagogisk programvare og programmer tilgjengelig på Raspberry Pi vil være berørings aktivert, noe som gjør læring og programmering enklere på Raspberry Pi. <P></P></LI></UL> <P dir=ltr align=left>Teknisk spesifikasjon</P> <P dir=ltr align=left>• 7" Berøringsskjerm<BR>• Skjerm størrelse: 194mm x 110mm x 20mm (inkludert avstand)<BR>• Synlig skjermstørrelse: 155mm x 86mm<BR>• Skjermoppløsning 800 x 480 pixels<BR>• 10 finger kapasitiv berøring<BR>• Kobles til Raspberry Pi bord med et bånd kabel koblet til DSI port.</P> <P dir=ltr align=left>Mål (BxDxH): 194x20x110mm.</P></SPAN></BODY>False5056070923850